AutoDome 700 Series IP PTZ Camera User Command Table | en 71
Bosch Security Systems, Inc. User Manual F.01U.273.798 | 3.0 | 2012.08
6 User Command Table
Locked Alarm Rule Output Function Key Comm No. Command Description
Y On/Off 1 Scan 360° Auto Pan without limits
Y On/Off 2 Auto Pan Auto Pan between limits
Y On/Off 8 Play Pre-position Tour Activate/Deactivate
Y Y On/Off 18 AutoPivot Enable Enables/disables AutoPivot
Y On/Off 20 Backlight Comp Backlight Compensation
Y On/Off 24 Stabilization Electronic Stabilization
Y On/Off 40 Restore Camera Settings Restores all setting to their original
defaults
Y Y On/Off 43 Auto Gain Control AGC–On, Auto, Off
50 Playback Tour A Activate/Deactivate
52 Playback Tour B Activate/Deactivate
Y On/Off 57 Night Mode setting Enables/Disables Night Mode (Day/
Night only)
Y Y On/Off 60 On Screen Display On–enable
Off–disable
On/Off 78 Intelligent Track Turns Intelligent Track on or off
Y Y On/Off 80 Digital Zoom Lock Turns digital zoom on and off
Y Y On/Off 86 Sector Blanking On–enable
Off–disable
Y Y On/Off 87 Privacy Masking On–enable
Off–disable
Y On/Off 90 Command Lock/Unlock On–lock on
Off–lock off
Y On/Off 94 Set Azimuth Zero Point Sets the zero degree pan position.
On/Off 95 Display Azimuth/
Elevation Readings
On–Displays azimuth/elevation
readings
Off–Hides azimuth/elevation
readings
On/Off 96 Display Compass
Heading
On–Displays compass heading
Off–Hides compass heading
On/Off 100 Record Tour A On– start recording
Off – stop recording
On/Off 101 Record Tour B On– start recording
Off – stop recording
