23.14
Removing and installing shaft sealing
ring for gear selector drum
•
Switch for gear indicator removed.
•
Gear selector drum removed.
•
Lever out shaft sealing ring with screwdriver.
•
Fit shaft sealing ring using drift,
BMWNo.231790 and handle,
BMWNo.005500.
Removing and installing bearing shell
for taper roller bearing on input shaft
•
Heat transmission housing to 100 °C.
•
Remove bearing shell with the aid of support,
BMWNo.008560, and internal extractor,
BMWNo.008563.
•
Fit new bearing shell in transmission housing
while still hot.
•
Drive bearing shell to bottom of seat with drift,
BMWNo.231770, and handle
BMWNo.005500.
Removing and installing ball bearing
on intermediate shaft
•
The intermediate shaft can only be replaced as a
complete unit.
•
Remove ball bearing using universal puller,
BMW No. 00 7 500.
•
To facilitate installation, heat ball bearing to
80 °C.
00 5 500
LT230140
23 1 790
00 8 560
LT230150
00 8 563
00 7 500
LT230160
