3
WARNING:
positive ground or a different voltage.
attachments.
WARNING:
product without causing the vehicle fusing to open. This can be determined by making
If a vehicle fuse opens repeatedly, do not keep on replacing it. The cause of the overload
must be found. On no account should fuses be patched up with tin foil or wire as this may
cause serious damage elsewhere in the electrical circuit or cause fire.
WARNING:
sometimes there is a possibility of small debris being discharged from the air vents, especially
after cleaning / replacement of the filters as debris inside the unit can be disturbed.
Symbols
definitions are as follows:
V ..................volts A ................... amperes
Hz ................hertz W ..................watts
min ..............minutes
or AC .......alternating current
or DC ..direct current
n
o .................no load speed
................Class I Construction .................earthing terminal
(grounded)
.................safety alert symbol
................Class II Construction .../min or rpm..revolutions or reciprocation
(double insulated) per minute
SAVE THESE INSTRUCTIONS
PRODUCT FEATURES
7. Accessory clip
9. Crevice tool
ASSEMBLY
MOUNTING ACCESSORIES (FIGURES A - C)
forward for dusting and ufigure A
To remove an accessory, press the accessory clip and
remove the accessory as shown in figure B.
1
3
5
4
2
6
8
7
9
12
10
11
A
