Part No 500402 3 F020513A
BC2403 Series Brush Cutter Owner’s Manual
BC 2403 SERIES SPECIFICATIONS
Briggs and
Stratton INTEK
OHV
Briggs and Stratton
INTEK OHV
In accordance with
2000/14/EEC standards
SOUND DATA
SOUND LEVEL 93 Dba at Operator’s position
Sound tests were conducted in accordance with 2000/14/EEC and were performed on 2/21/2002 under the conditions listed below.
Sound power level listed is the highest value for any model covered in this manual. Please refer to serial plate on the unit
for the sound power level for your model.
General Conditions: Sunny
Temperature: 80
o
F (25
o
C)
Wind Speed: 2.0 mph (3.2 kph)
Wind Direction: South
Humidity: 63.5%
Barometric Pressure: 29.98” Hg (761mm Hg)
VIBRATION DATA
VIBRATION LEVEL .5g (4.87 m/s
2
)
Vibration levels at the operator’s handles were measured in the vertical, lateral and longitudinal directions using calibrated vibration test
equipment. Tests were performed on 5/19/1995 under the conditions listed below.
General Conditions: Sunny
Temperature: 89
o
F (31.7
o
C)
Wind Speed: 6.1 mph (9.9 kph)
Wind Direction: West
Humidity: 49.7%
Barometric Pressure: 29.88” Hg (101.19 kPa)
