1 — SAFETY
1-5
• NEVER allow electrode contact with any part of the platform if welding is be-
ing performed by a worker from the platform.
• NEVER use without the floor pads fully based on the floor.
• NEVER override or by-pass manufacturer's safety devices.
• NEVER release floor locks or move unit with a person or materials on board.
• NEVER stand or sit on guardrails. Work only within the platform guardrail area
and do not lean out over guardrails to perform work.
• NEVER attempt to increase working height with boxes, ladders, or other means.
• NEVER operate this equipment when exposed to high winds, thunderstorms,
ice, or any other weather conditions that would compromise the safety of the
operator.
• NEVER climb up or down masts.
• NEVER allow ropes, electric cords, hoses, etc. to become entangled in the
equipment when the platform is being raised or lowered.
• NEVER exceed manufacturer's platform load limits and make sure all materials
are evenly distributed over the entire platform.
• NEVER exceed platform load ratings by transferring loads to platform at ele-
vated heights.
• NEVER use guardrails to carry materials and never allow overhang of materials
when raising or lowering platform.
