A SERVICE OF

logo

Open as PDF
next previous
40
G Wireless Router
SECTIONSTable of Contents 1 2 3 4 6 7 8 9 105
ALTERNATE SETUP METHOD
Setting your Connection Type if you are a Telstra
®
BigPond User
[Australia and New Zealand Only]. Use this connection type for BigPond Cable and OptusNet Cable connections only.
Clicking “Apply Changes” will reboot the Router. Once the Router has
rebooted, you will need to do the following:
1) Unplug the power cable from both the cable modem and the
Belkin Router.
2) Reconnect the power cable to the cable modem, and wait until all the
lights on the modem have stopped flashing.
3) Reconnect the power cable to the Belkin Router.
To confirm you are successfully connected to the Internet, open an
Internet browser, such as Internet Explorer
®
, Firefox
®
, or Safari
®
, and
ensure that you can browse web pages.