23
Sport Bar Support
Side
Fender
PULL
HERE
PUSH
HERE
Rear of
Vehicle
24
• Fit the sport bar assembly into the holes in the top side of
the vehicle.
• Push down firmly on a sport bar support while pulling up on
the side fender to fit the sport bar into the vehicle.
• Repeat this procedure on the other side of the vehicle.
• Turn the vehicle on its side.
• Insert two #10 x
3
/
4
" screws into the holes (behind the rear
wheels) in the underside of each rear wheel well, through the
vehicle and into the ends of the sport bar. Tighten the screws.
• Next, insert two #10 x
3
/
4
" screws
into the holes (in front of the
rear wheels) in the underside of each wheel well, through the
vehicle and into the ends of the sport bar. Tighten the screws.
2323
25
23
• Fit the remaining light covers to the top of the sport bar, as shown.
• Insert a #10 x
3
/4
"
screw into each light cover. Tighten the screws.
SIDE VIEW
BOTTOM VIEW
• Fit a support to one side of the sport bar.
• Insert a #8-32 x 1
5
/8
"
screw through the support, the sport bar
and out through the support.
• Fit a #8 acorn lock nut to the end of the screw.
• While holding the acorn lock nut with an adjustable wrench or
pliers, tighten the screw.
• Repeat this procedure to fasten the other support to the sport bar.
22
Sport Bar
Supports
14
ASSEMBLY
F
L7820pr-0920
Light
Covers
Lights
