A SERVICE OF

logo

10 DSR Installer/User Guide
Chapter 2: Installation 11
attached system is powered-on. The amber LED will illuminate when that port
is selected by the DSView Client.
Setting up your network
The DSR system uses IP addresses to uniquely identify the DSAuthentication
Server, the DSR units and the computers running DSView. The DSR supports
both bootP (a subset of DHCP) and Static IP addressing. Avocent recommends
that IP addresses be reserved for each unit and that they remain static while
the DSR units are connected to the network. For additional information on
how the DSR uses the TCP protocol, see Appendix D.
Figure 2.1: The DSR in a Network Configuration
DSR2161
Digital
User
Analog
User
Authentication
Service
TCP/IP
DSAut
h
CAT5 Connection
KVM-Connection to Switch
Digital IP-connection