PITCH ADJUSTMENTS
©American Audio® - www.AmericanAudio.us - Flex 100MP3 Instruction Manual Page 24
2. PITCH BENDING:
Unlike the adjustment this function will momentarily increase or decrease a tracks speed
during playback. There are two ways to operate this function with the (-) & (+)or with
the The maximum pitch bend percentage allowed is +/- 100%. The pitch bend function will
work in conjunction with the pitch setting. For example, if theis set to a
2% pitch gain the pitch bending process will begin at 2% and will continue to the maximum of +/- 100%.
Holding down or tapping on the
will pro-
vide a speed bump in the playback
pitch.
Holding down or tapping on the
will pro-
vide a slow down in the playback
pitch.
PITCH BEND BUTTONS (11):
Thewill increase track playback speed and the
will decrease track playback speed. The extent to which the speed changes is proportionate to the amount
of time the button is pressed. For example, if theis held down continuously as
in figure 31, the disc speed will increases and will continue to increase until it reaches a maximum of 100%
speed gain. When you release the the disc speed will automatically return to
it’s previous set speed.
You may change the
operating range at any time. To change the operating
range be sure the pitch function is turned on, see figure 28. The pitch per-
centage can be changed between +/-4%, +/-8%, +/-16%, and +/- 100%.
4% will allow the least amount of pitch manipulation and 100% will allow
the most amount of pitch manipulation. To adjust the different ranges,
press the and tap on the
until your desired value is reached, see figure 30.
