Introduction
The USB 2.0 Ethernet Adapter is a high performance and highly integrated USB
2.0 bus Ethernet Controller with embedded 7K*16 bit SRAM. The Adapter
supports both 10 Mbps and 100 Mbps Ethernet function based on IEEE802.3
and IEEE802.3u LAN standard.
Package Contents
• USB 2.0 Ethernet Adapter
• Driver CD
• Quick Installation Guide
Features
• Compliant with BOTH the Standard Specification of USB 2.0 and USB 1.1
• Compatible with IEEE 802.3u 100 BASE-T, TX, and T4
• Single chip USB to 10/100 Mbps Fast Ethernet Controller
• Supports BOTH bus or self powered mode
• Embedded 7K*16 bit SRAM, 256*16 bit SRAM and 8 FIFO
• Supports both full-duplex or half-duplex operations
• Provides a MII port for both Ethernet and PHY interface
• Supports suspended mode and remote wake-up (link-up or magic packet)
• PHY power down mode for power saving
• External PHY loop-back diagnostic capability
System Requirements
• IBM compatible Pentium-233MHZ or faster
• 64 MB RAM or more
• Available USB 2.0 Port
• Systems with OS: MS Windows 98SE / ME / 2000 / XP
