Administrative Tasks
600716 Rev A Trouble- shooting Tools 4-27
Troubleshooting
Tools
An example of the output is shown below:
Hardware
Configuration
Report
To view a report of current drives and subsystems configured
into the storage systems, follow the steps below:
Step 1. Run the
fsconfig command without options to
generate a report for all components.
Step 2. Use other appropriate options as needed. For
command information, refer to the Command
Reference book.
% fschstate
---------------------------------------------------------------------
Component Status
Report
Thu Jan 21 17:27:52 1999
Component Alias Drive ID State Status Media ID
AMLJ_CTIII_DRO 101 ON FREE NONE
AMLJ_CTIII_DR1 102 ON FREE NONE
VolSub N/A ON N/A N/A
The FileServ system is active.
FS0000 07 1464244 fschstate completed: Command Successful.
* Drives not configured in FileServ.
+ Media mounted in a drive is unknown to FileServ.
Note
If the argument contains a space, put single
quotes around the argument.
