Operational, Basic, and Advanced Parameters
41-001160-03, Rev 00, Release 2.4 A-11
Parameter –
ethernet port 0
LAN Port
(in Web UI)
IP phone UI Options->Administrator Menu->
Network Settings
Aastra Web UI Advanced Settings->Network->
Basic Network Settings
Configuration Files aastra.cfg, <mac>.cfg
Description The send (TX) and receive (RX) method to use on Ethernet port 0 to
transmit and receive data over the LAN.
Format Integer
Default Value 0
Range 0 - auto-negotiate
1 - full-duplex, 10Mbps
2 - full-duplex, 100Mbps
3 - half-duplex, 10Mbps
4 - half-duplex, 100Mbps
Example lan port: 1
Parameter –
ethernet port 1
PC Port
(in Web UI)
IP phone UI Options->Administrator Menu->
Network Settings
Aastra Web UI Advanced Settings->Network->
Basic Network Settings
Configuration Files aastra.cfg, <mac>.cfg
Description The send (TX) and receive (RX) method to use on Ethernet port 1 to
transmit and receive data over the LAN.
Format Integer
Default Value 0
Range 0 - auto-negotiate
1 - full-duplex, 10Mbps
2 - full-duplex, 100Mbps
3 - half-duplex, 10Mbps
4 - half-duplex, 100Mbps
Example ethernet port 1: 2
