Factory Settings on Delivery Authorisations
14
*) These settings are shown only in the Expert view.
The following important settings are active without further configuration:
■ External authorisation: International numbers can be dialled from all con-
figured terminals. External lines must be seized by entering a preset code.
■ Call forwarding to internal and external numbers can be activated. Call for-
warding after delay is performed after 20 seconds. Call diversions for other
users and call diversions by other users are deactivated.
■ The telephone lock can be activated. The terminal PIN is “0000”.
■ The white list, black list and call filter are not preconfigured and therefore not
active. If these lists are configured, they can be activated for user groups.
■ Every standard user can change the configuration of Aastra 800.
Number of suppressed digits
*)
000
Incoming basic amount
*)
0,00 0,00 0,00
Outgoing basic amount
*)
0,00 0,00 0,00
Cost factor
*)
100% 100% 100%
Network
*)
E-mail notification
*)
++-
Send E-mails
*)
++-
Others
*)
Speed dialling
*)
++-
Keypad dialling
*)
++-
Time control
*)
---
Booking number may be set up
*)
++-
Send short messages
*)
++-
User group settings
Function / Authorisation Standard Adminis-
trators
Guests
