1. Manuals
  2. Household Appliance Support
  3. Hunter Fan Support
  4. Thermostat Support
Support User Manuals
Question About Hunter Fan Thermostat 44422
Pin for programming...

Where can I buy some pins to program the thermostat???

Asked by Jim on 02/23/2011 2  Answers

ManualsOnline posted an answer 13 years, 9 months ago

The ManualsOnline team has found the manual for this product! We hope it helps solve your problem. Get the Manual Here

ESTUQUE posted an answer 13 years, 9 months ago

0 The stat has a keyboard lock that disables reprogramming & changing of the temperature, if that is what you want to do then this should work. Insert the narrow end of a metal paper clip (see pic) into the opening for the key, it should go in about a half inch. Now let go of the clip and allow it to be free, it should stay in the thermostat if it is thick enough to bridge the contacts properly. That should do it, program away.
Was this answer helpful?

ESTUQUE posted an answer 13 years, 9 months ago

0 You will need to open the thermostat and follow the Owner’s Manual direction. To open the thermostat, find the seam (crack) that runs along the top and/or bottom edges of the unit. Take a paper clip (see pic), round edge in the seam, and slide it along until it drops into a small dip now apply same pressure to this tool to unlock the plastic clips that hold the two halves of the stat. There are two plastic clips along each seam that hold the stat together so you may have to repeat for the second one.
Was this answer helpful?

Add Your Answer

Please Note: Do not submit personal information as it will be displayed online.
Ask a Question Request a Manual