Zenoah PE2500H Plumbing Product User Manual


 
6
Do not touch the spark plug or the plug wire
while the engine is in operation. They may cause
an electric shock.
Do not touch metallic parts such as the muffler,
spark plug, etc. with bare hands during the
operation of engine or immediately after a stop.
They may be very hot and cause burns.
Apply isolation measures to keep children or
infants away from the pump so that you can
operate it in safe area.
Temperature of the pumping up water shall be in
between 5°C to 60°C. Otherwise, the pump may
be damaged.
Avoid idle pump operation(operation with no
water in the pump). This may cause pump
damage.
Be sure to use only attached suction hose or an
equivalent “water suction hose” as an water inlet
hose.
Make sure to couplings and clumps(attached to
this kit) when connecting the suction and
discharge hoses to the pump.
The engine shall be stopped to transfer pump.
NOTES FOR MAINTENANCE
In order to maintain your machine in proper
condition, perform regular checking and
maintenance described in this manual. In case
you need a maintenance service or replacing of
component not listed in this manual, consult with
the shop of your purchase or nearby ZENOAH
service dealers.
Be sure to stop the engine before any inspection
or maintenance procedure.
Never disassemble nor modify your machine.
This may cause damage of machine during
operation and end up with serious accidents.
Always use ZENOAH genuine parts or ZENOAH
specified parts for replacement.
Keep this manual handy so that you may refer
back to it later whenever any doubt arises.
When you sell or lend this machine to others,
never forget to attach this operator’s manual
together.
2. For safe operation