TECHNICAL SPECIFICATIONS
CUTTER 36V (SCE) 86037030 12/05/06
3-1
ITEM DIMENSION/CAPACITY
Nominal power 2160 W
Rated Voltage 36 Volt DC
Rated Amperage 60 amps
Batteries 6 x 6 volt 250-305-335 AH @ 20 Hr rate
Scrub Brush Motors 2 x .75 hp (.56 kW)
Vacuum Motor 3 Stage .75 hp (.56 kW)
Propelling Motor .75 hp (.56 kW)
Mass (GVW) 1265 lb (574 kg) w/335 AH batteries
Weight empty without batteries 433 lb (196 kg)
Solution Control Gravity feed, fully variable with automatic shut-
off in neutral
Solution tank capacity 32 gal (118 L)
Recovery tank capacity 35 gal (123 L)
Scrub brush diameter 32 in. (81 cm) scrub head 16 in (41 cm)
Scrub brush pressure Mechanical, 80 lbs floating
130 lbs restricted (356n-578n)
Scrub brush speed 200 rpm
Tires 2 x 12 in (30.5 cm) Non-Mark Foam Fill
Casters 2 x 4 in (10.2 cm) polyurethane, Non-Mark
Foundation Pressure 64 lbs/in² (441 kPa)
Maximum Speed 3.2 miles/hour (5.2 kW/hour)
Coverage with 32 in. (81 cm) scrub head 36,250 ft²/hr @ 3.0 mph with 2 in overlap *
Frame Construction Powder coated steel
Brakes (optional) Tire lock parking
Minimum aisle u-turn width with 32 in. (81 cm) scrub head 69 inches (175 cm)
Maximum rated climb and descent angle with empty tanks and
without optional parking brake
2%
Maximum rated climb and descent angle with full tanks and
without optional parking brake
2%
* Cleaning rate results will vary depending on floor type, building structure, etc.