Filter
Top Products
TROUBLESHOOTING/WIRING DIAGRAM
PRSIF2/PRSDIF2 98902 02/08/03
4-2
TROUBLESHOOTING
PROBLEM. CAUSE SOLUTION
Little or no solution flow
Clogged spray jet on cleaning
tool
Remove and clean jets
Faulty pump
Check and replace pump.
(Call Windsor Tech. Services first)
Incorrectly attached solution
hose
Ensure solution hose coupler is securely attached to the
coupler on the solution tank.
Loss of vacuum/
Solution recovery
Incorrectly attached vac hose
Ensure vac hose is pushed completely onto the recovery
tank inlet.
Obstruction in cleaning tool Inspect for and remove any debris.
Recovery tank is not securely
mounted on the solution tank.
Tighten latch on back end of the machine.
WIRING DIAGRAM