Filter
Top Products
MAINTENANCE
86011370 NUWAVE 05/01/07
4
-
3
BELT REPLACEMENT
The primary drive belt and secondary belt should be
replaced if they are damaged or broken. To determine
if a belt is damaged or broken, there will be a
noticeable drop in the performance of the machine or
the brushes will not spin when the machine is turned
on.
PRIMARY DRIVE BELT REPLACEMENT
The primary drive belt is removed from the under side
of the machine.
1. Unplug power cord.
2. Adjust handle into vertical position and lock cam
lever. Tilt machine on it’s back using handle to
support it’s position.
3. Remove belt guard by loosening the (2) mounting
screws.
4. Remove brush motor assembly by loosening the
(4) mounting bolts.
5. Remove damaged or broken belt from drive
pulleys and replace with a new drive belt. Be sure
the grooves in the drive belt match the grooves in
the drive pulleys.
6. Install brush motor assembly with new drive belt to
the machine by using the (4) mounting bolts. With
mounting bolts in place but not fully tightened, use
weight of the brush motor assembly to apply
proper tension to the drive belt. Once the belt is
properly tensioned, fully tighten the mounting
bolts.
7. Attach belt guard to the frame by using the (2)
mounting screws.
8. Plug machine into a power supply and turn it on to
assure the machine is running properly.