Filter
Top Products
OPERATIONS
CADET 86038340 04/19/07
3-7ENG
Select intermittent or continuous
switch setting to turn on brush and
start solution spray.
The intermittent setting requires the
operator to hold the switch in the
“on” position with the thumb, and is
typically used in small areas where
short cleaning passes are made.
The continuous setting allows the
operator to set the switch in the “on”
position with one touch, and is
typically used in large areas where
long cleaning passes are made.
Lower machine to floor.
Tip machine back by main handle
to move to starting point.
STEP
5
STEP
6
STEP
7
INTERMITTENT
CONTINUOUS