Filter
Top Products
TRIDENT COMPACT
17
"
230V/240V
Page
10
of
27
MAINTENANCE
SQUEEGEE
ASSEMBLY
Before and during use of machine, use a damp cloth to
wipe the outside and inside of squeegee to remove
buildup of foreign material on the squeegee blades.
This prevents streaking and residue
on
the
floor.
Squeegee
wear:
After extended use, the squeegee blades will wear.
To
improve squeegee performance and extend wear, pro
-
ceed as follows:
1.
Turn
off
all switches and place the machine
on
a level surface. Raise
the
squeegee
to
the transport position.
Loosen knobs on the
left
and right hand
sides of squeegee until squeegee can be
removed from the squeegee bracket.
Loosen the fasteners on front of squeegee
to replace or adjust front blade.
Unlatch rear squeegee latch to replace rear
blade.
2.
3.
4.
Adjusting Squeegee Assembly
1.
2.
Lower the squeegee and move the machine
forward.
Obsetve the level
of
the squeegee for an
even curl along the length of the blade. Use
camber adjustment knob to achieve even curl if
required.
Adjust the down pressure nut located
on
squeegee mounting assembly.
Do
not apply
excessive force.
3.
SQUEEGEE
DEFLECTION
INCORRECT
I
NOTENOUGH
I
L
1
TOOMUCH
TCE2O-IF
98481
7/1\87