Windsor 10125080 Vacuum Cleaner User Manual


 
CONTROLS
WAVIF 86038520 05/15/07
3-1ENG
1 Main Handle. Adjusts for operator comfort and
storage.
2 Brush on/off lever. Activates brush when
depressed.
3 Accessory vacuum hose and wand. Allows
operator to clean edges, recessed, ledges,
upholstery, etc.
4 Detail tools Dusting brush, crevice and
upholstery tools for above the floor cleaning.
Dusting brush comes with adapter for
attachment directly to hose. Upholstery and
crevice tool connect directly to both the hose
and the wand. The crevice tool fits loosely on
the wand.
5 Handle Adjustment Lever. Located on the left
side of handle. Pull away from handle to loosen,
adjust handle and press parallel to handle to
tighten.
6 Vac on/off switch. Turns on and off vac motor.
7 Brush motor circuit breaker. Provides
overcurrent protection for the brush motor.
8 Vac motor circuit breaker. Provides
overcurrent protection for the vacuum motors.
9 Exhaust filter. Filters exhaust air for safe and
quiet operation.
10 Accessory hose activation pedal. Press
pedal down to use the accessory hose. Lift up
with toe for normal use.
11 Brush adjustment lever. Allows operator to
adjust brush to proper height for the carpet. (1)
for low nap carpet, (5) for thick nap. Position (6)
is storage.
12 Dust bag cover. Raise to allow access to dust
bag and vac motors.
13 Cloth dust bag. High filtration cloth bag with
zipper opening to access paper bag.
14 Paper bag. Fits within cloth bag for clean and
easy dust removal.
7
8