Filter
Top Products
ASSEMBLY/OPERATION
86324140 AXCESS 03/25/09
3-3
ASSEMBLY
Please read all instructions before
using this machine.
1. Carefully attach the brush nozzle to the vacuum
cleaner through the fitting at the bottom of the
vacuum until it locks. [See below]
2. Push the black end of the hose [A] into the
connection on the filter cover [B].
3. Insert the hose handle [C] into the suction opening
on the side and press the hose into its place on
the side of the machine, as shown.
OPERATION
Your vacuum is operated with an electric power brush. The
machine can be used in the upright position.
When locking the vacuum in the
upright position, please ensure the
bag housing is clicked in place, face forward to the center
or the unit could overturn.
Please ensure that the On/Off switch is in the OFF
position. Turn the cable hook to release the power cable
and plug into the walls main outlet.
Now you may start your machine by moving the power
switch to the ON position.
To use the power head (12” or 15” model):
1. Press the foot pedal [D] on the rear of the power
head and lower the machine handle to an angled
position. The brush motor will then turn on.
When using the
hose and
attachments, keep the machine in
upright position.
The hose handle can be removed from
the side of the vacuum and can be used
with or without attachments. Also
maintain a grasp on the machine when
using the hose as it could tip if the hose
is pulled too far.
The machine can also be used without
the power head. You can easily carry
the machine by using the carrying
handle.
When you have finished using the
machine, turn it off by moving the power
switch to the OFF position. Then unplug
the power cable and wind it into the
cable hook and handle.
! CAUTION
! CAUTION
! CAUTION
Handle
Hose
Handle
Carrying
Handle