Filter
Top Products
FILLING OPERATIONS
FILLING THE CADET
NOTE: Use clean bucket of water to fill solution tank
Do not put defoamer, solvents, spotter or
prespray chemicals in the solution tank.
Do not allow water to spill into vacuum motor inlet.
Dry spillage from top of solution tank before
replacing recovery tank.
CHEMICALS
Suitable Chemicals Non-Compatible Chemicals
Alkalis Aldehydes
Detergents Aromatic Hydrocarbons
Hydroxides SP Butyls
Soaps Carbon Tetrachloride
Vinegar Clorox*
Chlorinated Bleaches
Chlorinated Hydrocarbons
Lysol*
Methyl Ethel Ketone (MEK)
Perchorethylene (perc)
Phenolics
Trichlorethylene
D-Limonene
STEP
1
Remove recovery
tank
A
dd water
Add cleaning
chemical
Replace recovery
tank
RECOVERY TANK
SOLUTION
TANK
STEP
2
7 gal.
(26.5 ltr.)
FILL LINE
140°F
(
60°C
)
STEP
3
7 – 14oz.
(207ml – 414ml)
STEP
4
CADET 86038220 03/16/07
3-5