Filter
Top Products
OPERATING
STARTING YOUR NEW WINDCHASER PRODUCTS PACE9
The compressor is an essential component of the appliance for producing cold air. This
appliance is fitted with a thermal protection device which allows the compressor to be
started only after a time delay of three minutes.
1. Press the ON/OFF Button to turn on the unit.
2. Press the Mode Button to select fan.
3. Select Low, Medium or High Speed by
pressing the fan speed button.
1. Press the ON/OFF Button to turn on the unit.
2. Press the “MODE” button to select a mode
function (Fan, Cooling or Dehumidifier).
3. Select Low, Medium or High Speed by
pressing the fan speed button.
4. Use the (+) and (-) Thermostat buttons to set
the desired thermostat temperature.
5. The appliance will stop air conditioning once
the selected temperature has been reached.
It will then continue to ventilate. Once the
room temperature has exceeded the
selected temperature, the unit will begin to
air condition again.
Ventilation Only
aa
aa
a
Air Conditioning
Adjust the direction of the airflow by directing the louvers (3,Fig. A).
6