Filter
Top Products
Troubleshooting Floor Furnace cont.
SYMPTOM
10. Not enough heat.
11. Too much heat.
POSSIBLE CAUSE
A. Thermostat set too low.
B. Appliance close to thermostat.
C. Thermostat in bad location.
JD. Thermostat out of calibration.
A. Thermostat set too high.
B. Thermostat out of calibration.
C. Valve sticks open.
D. Thermostat in draft.
CORRECTIVE ACTION
Raise setting.
Move heat source away.
Relocate thermostat.
Recalibrate or replace.
Lower setting,
Recalibrate or replace.
Replace valve.
Relocate thermostat.
-15-