Whynter AFR-300 Air Cleaner User Manual


 
7
CONTROL PANEL & REMOTE CONTROL
1. ON/OFF: Turns on / off the air purifier.
2. FAN: Sets fan speed setting in the cycle of High –> Medium –> Low –> Silent.
3. SILENT: Sets the air purifier to run at a noise level below 35 dB to ensure sound
sleep. By pressing this button, this machine will be switched into the “SILENT” fan
mode.
4. SLEEP: Sets running time of the air purifier at SLIENT mode for 8 hours. In the
SLEEP mode, the TIMER function cannot be used.
5. UV Lamp: Turns on / off the photo-catalyst POC function.
6. UV Lamp indicator on LCD display: When the UV lamp is on, the screen displays
, the sun icon. When the screen displays , it indicates that the UV lamp
needs to be replaced. The working life of a UV lamp is about 15,000 hours.
7. HEPA filter replacement indicator: When the HEPA filter replacement indicator
blinks on the LCD display, you need to change a new HEPA filter.
8. LED: The background of the LED light can be turned on and off.
9. Intentionally removed.
10. TIMER: By pressing “TIME” button once, “88:88” will be displayed, press the “+” &
“-” buttons to set the current time. When the air purifier is turned on, press the
“TIME” button twice quickly, “88:88
time off
” will be displayed, then press the “+” & “-”
buttons to adjust the time off. When the machine is on Standby mode, press the
“TIME” button twice quickly, “88:88
time on
” will be displayed, then press the “+” & “-”
buttons to adjust the activation time.
11. ANTI-POLLEN: Turns on the pollen-removing function. This mode of operation is
recommended for pollen season. The fan speed will run in a cycle of medium
speed for 5 minutes and low speed for 5 minutes.