Filter
Top Products
www.white-rodgers.com
PERIOD 1
Time Temp Time Temp
Heating/Cooling Schedule Plan
Mon
Tues
Wed
Thur
Fri
Sat
Sun
HEAT COOL
PERIOD 2
Time Temp Time Temp
HEAT COOL
PERIOD 3
Time Temp Time Temp
HEAT COOL
PERIOD 4
Time Temp Time Temp
HEAT COOL
PROGRAMMING YOUR THERMOSTAT
CONTINUED FROM FIFTH PAGE
However, you may use the same heating and cooling tempera-
tures for consecutive time periods. You can choose start times,
heating temperatures, and cooling temperatures independently
for each day programs (for example, you may select 5:00 AM and
70° as the 1st period heating start time and temperature on
Monday, then select 7:00 AM and 76° as the 1st period cooling
start time and temperature on Monday). Use the table at the
bottom of the page to plan your program time periods and the
temperatures you want during each period. You may also want to
look at the sample program table to get an idea of how the
thermostat can be programmed.
Entering Your Program
Follow these steps to enter the heating and cooling programs you
have selected.
Set Current Time and Day
1. Press TIME button once. The display will show the hour only.
EXAMPLE:
PM
2. Press and hold either or until you reach the correct
hour and AM/PM designation (AM begins at midnight; PM
begins at noon).
3. Press TIME once. The display window will show the minutes only.
EXAMPLE:
4. Press and hold either or until you reach the correct
minutes.
5. Press TIME once. The display will show the day of the week.
6. Press or until you reach the current day of the week.
7. Press RUN once. The display will show the correct time and
room temperature alternately.
Enter Heating/Cooling Times and Heating
Temperatures
1. Move the SYSTEM switch to HEAT.
2. Press PRGM once. MO, the abbreviation for Monday, will be
displayed. Also displayed are the currently programmed start
time for the 1st heating period and the currently programmed
temperature fo rthe 1st heating period (flashing).
EXAMPLE:
AM
MO TU WETH FR
This example shows that for the 1st Monday heating period,
the start time is 6:00 AM, and 70° is the programmed tempera-
ture (this example reflects factory preprogramming).
3. If the temperature displayed in not the temperature you want
for Monday”s period 1, press or until the correct
temperature is displayed.
4. To change the displayed start time to the time you have
selected for Monday’s heating period 1, press TIME once (the
programmed time will flash). Press or until your
selected time is displayed. The time will change in 15 minute
increments.
5. Press PRGM once. The currently programmed start time and
heating setpoint temperature for Monday’s heating period 2
will be displayed.
6. Repeat steps 3 and 4 to select the start time and heating
temperature for Monday’s 2nd heating period.
7. Repeat steps 3 through 5 for Monday’s 3rd and 4th heating
period. Monday’s heating program is now complete.
7
1ST
2ND
3RD
4TH
1ST
2ND
3RD
4TH
SAMPLE
Heating/Cooling Schedule Plan (Factory Program)
6:00 AM
8:00 AM
5:00 PM
10:00 PM
6:00 AM
8:00 AM
5:00 PM
10:00 PM
70 F
62 F
70 F
62 F
78 F
85 F
78 F
82 F
ALL DAYS OF THE WEEK
Start Time Temperature
Period
COOL HEAT