Filter
Top Products
SETTING THE DIAL
Wiring
All wiring must conform to local and national electrical codes and ordinances.
Follow the original equipment manufacturer's recommendations for proper wiring.
Adjust temperature setting by inserting a screwdriver into
open slot and turning pointer to desired temperature on
dial.
The dial setting on the fan control is the temperature at
which the contacts close. The dial setting on the limit
control is the temperature at which the contacts open.
INSTALLATION
This control is designed for flush mounting and to be
located directly in the air stream
Follow the original equipment manufacturers' recommen-
dations for proper location.
160
150
140
130
120
110F
100
90
80
70
FAN ON TEMP.
Adjustment Slot
110
120
130
140F
150
160
170
180
190
200
Adjustment Slot
757-1
758-1