Filter
Top Products
20
b. What temperature should the house be at this
time? These will be your DAY temperature
settings.
7a. What time does the first person arrive home in
the evening?
b. What temperature should the house be at this
time? These will be your EVE (evening)
temperature settings.
8a. What time does the last person go to bed at
night?
b. What temperature should the house be at this
time? These will be your NHT (night) tempera-
ture settings.
Now look at the factory preprogrammed times and
temperatures shown at right. If this program will
suit your needs, simply press
RUN
PRGM
to begin run-
ning the factory preset program.
If you want to change the preprogrammed times
and temperatures, follow these steps.
1. Determine the heating and cooling tempera-
tures you want to use. You may select up to four
heating temperatures (HEAT A, HEAT B, HEAT
C, and HEAT D), and up to four cooling tem-
peratures (COOL A, COOL B, COOL C, and
COOL D). Use the table on the following page
to write down the temperatures you have se-
lected.
To operate properly in the AUTO mode, there must
be a minimum 1
°F separation between the high-
Heating Program for
ALL days of the Week:
Cooling Program for
ALL Days of the Week:
PERIOD TIME TEMP PERIOD TIME
TEMP
1
2
3
4
5:00 AM
9:00 AM
4:00 PM
10:00 PM
70
70
70
64
1
2
3
4
5:00 AM
9:00 AM
4:00 PM
10:00 PM
78
82
78
78
NOTE