Filter
Top Products
NOTE
CHECK YOUR PROGRAMMING
Follow these steps to check your thermostat programming one
final time before beginning thermostat operation.
1. Move SYSTEM switch to HEAT position.
2. Press VIEW PRGM to view the 1st Monday heating period
time and temperature. Each time you press VIEW PRGM,
the next heating period time and temperature for Monday will
be displayed in sequence. Press HOLD/ADV DAY to display
Tuesday’s 1st heating period program. Press VIEW PRGM
to check the remaining Tuesday heating period times and
temperatures. To check each day’s heating program, press
HOLD TEMP/ADV DAY to change days, then press VIEW
PRGM to look at each programming period for the day (you
may change any time or temperature during this procedure;
remember that if you change the start time, it changes for
both heating and cooling).
3. Press RUN PRGM.
4. Move SYSTEM switch to COOL position.
5. Repeat step 2 to check cooling temperatures.
6. Press RUN PRGM to begin program operation.
YOUR THERMOSTAT IS NOW COMPLETELY PRO-
GRAMMED AND READY TO AUTOMATICALLY PROVIDE
MAXIMUM COMFORT AND EFFICIENCY!
If you are programming your thermostat for the first time, and you
want programming for all days of the week to be the same as
Monday’s program, press RUN PRGM to begin program opera-
tion (this COPY DAY feature only works the first time you
program your thermostat; if you are changing your thermostat’s
programming, you must program each day separately).
7. Press HOLD TEMP/ADV DAY once. TU (indicating Tuesday’s
program) will be displayed, along with the start time for the
1st heating/cooling period and the currently programmed
cooling setpoint temperature.
8. Repeat steps 3 through 6 to complete Tuesday’s cooling
program.
9. Continue entering each day’s programming until all cooling
temperatures have been selected.
10.Press RUN PRGM to end programming and begin program
operation.