Filter
Top Products
Energy Saving Factory Pre-Program
The 1F80-0471 thermostats are programmed with the energy saving settings shown in the table below for all days of the
week. If this program suits your needs, simply set the thermostat clock and press the RUN button.
The table below shows the factory set heating and cooling schedule for all days of the week.
Wake Up Leave For Work Return Home Go To Bed
(Period 1) (Period 2) (Period 3) (Period 4)
Heating
Program
Cooling
Program
6:00 AM 70°F 8:00 AM 62°F 5:00 PM 70°F 10:00 PM 62°F
6:00 AM 75°F 8:00 AM 83°F 5:00 PM 75°F 10:00 PM 78°F
Planning Your Program – Important
The Heating and Cooling Program schedules below allow you to pencil in your own program times and temperatures.
The 1F80-0471 comes configured for 5/2 day programming and can also be configured for 5+1+1 programming (see configu-
ration section).
Factory settings are listed on Monday through Friday, Saturday and Sunday. If you are re-programming a 5/2 day schedule,
pencil in your own times and temperatures directly below the factory times and temperatures.
If you are re-programming a 5+1+1 fill in all lines with the times and temperatures you want.
Keep the following guidelines in mind when planning your program.
• In Heating, lower temperatures will save energy.
• In Cooling, higher temperatures will save energy.
• If you plan on using Auto Changeover, do not program the heating higher than the cooling.
Wake Up Leave For Work Return Home Go To Bed
(Period 1) (Period 2) (Period 3) (Period 4)
6:00 AM 70°F 8:00 AM 62°F 5:00 PM 70°F 10:00 PM 62°F
6:00 AM 70°F 8:00 AM 62°F 5:00 PM 70°F 10:00 PM 62°F
Heating
Program
Mo-Fr
Sat-Sun
or Sat
Sun
5+1+1
only
6:00 AM 70°F 8:00 AM 62°F 5:00 PM 70°F 10:00 PM 62°F
Worksheet for Re-Programming 5/2 Day and 5+1+1 Day Program
Wake Up Leave For Work Return Home Go To Bed
(Period 1) (Period 2) (Period 3) (Period 4)
6:00 AM 75°F 8:00 AM 83°F 5:00 PM 75°F 10:00 PM 83°F
6:00 AM 75°F 8:00 AM 83°F 5:00 PM 75°F 10:00 PM 83°F
Cooling
Program
Mo-Fr
Sat-Sun
or Sat
Sun
5+1+1
only
6:00 AM 75°F 8:00 AM 83°F 5:00 PM 75°F 10:00 PM 83°F
PROGRAMMING (For Programmable Model Only)