Filter
Top Products
Removing & emptying water bucket
7
Drain hose connection method:
(to drain water from bucket continuously)
Do Not
damage
outside or
connection
will leak.
drain hose
connector cover
(not on all models)
center of drain hose connector
3.Attach a garden hose to drain hose
connector.The garden hose should
not be longer than 8 feet (2.4 m).Run
other end of garden hose into a floor
drain.Check that the hose lies flat
and in the drain.
To use the bucket without the garden hose:
For bucket style 1:
Use a garden hose cap to seal the drain
hose connector.
For bucket style 2:
Use a garden hose cap to seal the drain
hose connector.
Replace drain hose connector cover.
1.If your dehumidifier does not have
a drain hose connector cover, go to
Step 2.
If your dehumidifier has a drain
hose connector cover, use a flat-
blade screwdriver to remove cover
from drain connector.Turn cover
counterclockwise.Discard cover.It
cannot be reused. Go to Step 2.
2.Drill out only the center of the drain
hose connector.Use a minimum 1/4"
drill bit.
Bucket style 1
1.Slide off the drain hose connector
cover. Go to Step 2.
Bucket style 2