Filter
Top Products
10
Exhaust Control (on some models)
Set the Exhaust control to CLOSED for maximum continuous
cooling. The Exhaust control set OPEN allows you to draw stale
or smoky air from the room.
■ OPEN—to exhaust room air to the outside
■ CLOSED—to circulate room air
NOTE: The Exhaust control will function only when the Fan
Control is operating.
Style 1—Cool only air conditioner settings
Fan Control
Set the Fan control to the desired setting. When the air
conditioner is operating at Low Cool, High Cool, or Turbo Cool,
the fan circulates air continuously.
■ Turbo Cool—for maximum cooling
■ High Cool—for normal cooling
■ Low Cool—for sleeping comfort
■ Fan Only—to move air continuously without cooling
NOTE: Fan runs on Turbo speed only.
Thermostat
Turn the THERMOSTAT control to a mid-setting. Adjust the air
conditioner's performance by turning the Thermostat control
clockwise for maximum cooling. For less cooling, turn the
THERMOSTAT control counterclockwise. Experiment to find the
setting that suits you best.
Style 2—Heat/Cool Air Conditioner Settings (on some
models)
Fan Control
Set the Fan control to the desired setting. When the air
conditioner is operating at Low Cool, High Cool, Turbo Cool, Low
Heat or Turbo Heat, the fan circulates air continuously.
■ Low Heat—for reduced heating
■ Turbo Heat—for maximum heating
■ Turbo Cool—for maximum cooling
■ High Cool—for normal cooling
■ Low Cool—for sleeping comfort
■ Fan Only—to move air continuously without cooling or
heating
NOTE: Fan runs on Turbo speed only.
■ Power Saver—fan runs only when cooling is needed.
Since the fan does not circulate the room air continuously,
less energy is used but the room air is not circulated as often.
Use Power Saver when you are asleep or away from home.
NOTE: Fan runs on Low speed only.
Thermostat
Turn the THERMOSTAT control to a mid-setting. Adjust the air
conditioner’s performance by turning the Thermostat control
clockwise for maximum cooling. For less cooling, turn the
THERMOSTAT control counterclockwise. Experiment to find the
setting that suits you best.
For heating, turn the THERMOSTAT control counterclockwise.
The electric strip heater is activated when the Fan control is set to
a heat setting.
NOTE: Your air conditioner is not designed to be used as a
primary heat source. It is intended for supplemental heating only.
CLOSED
OPEN