Whirlpool AD25BSS Dehumidifier User Manual


 
2-8
DEHUMIDIFIER CARE
CLEANING THE AIR FILTER
(ON SOME MODELS)
The air filter is removable for easy cleaning. A
clean filter helps remove dust, lint, and other
particles from the air and is important for best
operating efficiency. Check the filter every 2
weeks to see whether it needs cleaning.
1. Turn off dehumidifier.
2. Remove bucket.
3. Pull filter down from below front louvers.
4. Pull bottom edge of air filter toward you to
clear the bottom of the dehumidifier.
5. Use a vacuum cleaner to clean air filter. If air
filter is very dirty, wash it in warm water with
a mild detergent. Do not wash air filter in the
dishwasher or use any chemical cleaners.
Air dry filter completely before replacing to
ensure maximum efficiency.
6. Slide air filter up into the dehumidifier.
7. Reinstall bucket.
8. Turn on the dehumidifier.
CLEANING THE DEHUMIDIFIER
Exterior
NOTE: Have an authorized service technician
clean and service the interior coils of your
product annually.
1. Turn off dehumidifier.
2. Dust front grille and side panels with a soft
brush or the dusting attachment of your
vacuum cleaner.
Water Bucket
Every few weeks, rinse the inside of the water
bucket with a mild detergent to avoid growth
of mold, mildew and bacteria.
Water Level Float
The dehumidifier has an Empty/Adjust Bucket
light and a water level float. The bucket must
be properly aligned for the water level float and
Empty/Adjust Bucket light to work.
NOTE: Be sure float is snapped in place.
A. Water level float
B. Bucket
A
B