Filter
Top Products
Operating Your Air
Conditioner
Ooerating your air conditioner properly enables you to obtain the best possible results. This
section explains proper air conditioner operation.
Starting your air conditioner
f
.
EXHAUST CONTROL
FAN CONlROL THERMOSTAT
1. Set EXHAUST CONTROL to CLOSED
for maximum cooling performance.
2. Set FAN CONTROL to the desired
setting.
HIGH FAN -
for maximum room air
circulation when no cooling is desired
SUPER COOL
- for fastest cooling
NORMAL COOL
- for normal cooling
LOW COOL
- for minimum cooling
LOW FAN -
for minimum room air
circulation when no cooling is desired
3. Turn the THERMOSTAT Control to the
desired setting. You can adjust the air
conditioner’s cooling performance by
turning the THERMOSTAT Control
clockwise for more cooling or
counterclockwise for less cooling. You
will need to experiment to find the
setting which suits you best.
4. To turn the air conditioner off, or in the
event of a power interruption, turn
FAN CONTROL to OFF.
NOTE: If you turn your air conditioner
off or if the compressor turns off when
lowering the THERMOSTAT Control,
wait at least three minutes before
turning it back on. Doing this keeps the
air conditioner from blowing a fuse or
tripping a circuit breaker.
FAN CONTROL
THERMOSTAT
12