Whirlpool ACQ214 Air Conditioner User Manual


 
&T;;FaYour Air Conditioner
The exhaust vent control
The Exhaust Vent Control settings either draws
stale or smoky air from the room or circulates room
air.
1. To exhaust room air:
Set Exhaust Vent Control to OPEN. For
cooling, set Fan Speed Control to the desired
setting (ENERGY SAVER or NORMAL). If no
cooling is desired, use the FAN ONLY setting.
2. To circulate room air:
Set Exhaust Vent Control to CLOSED. For
cooling, set Fan Speed Control to the desired
setting (ENERGY SAVER or NORMAL). If no
cooling is desired, use the FAN ONLY setting.
NOTE: For maximum performance, the Exhaust
Vent Control must be set to CLOSED when
cooling or room air circulation is desired.
Changing air direction
The air direction cartridges on both sides of the unit
control the direction of the cooled air. The air
direction cartridge may be rotated to direct the air
straight ahead or to the sides of the unit. The
louvers in each air direction cartridge are operated
by a tab. The tab may be used to direct the air up,
down or straight ahead.
Cleaning Your Air Conditioner
Proper use and care of your air conditioner will
help ensure longer life of the unit and lower
operating costs. Follow these instructions carefully.
Call your authorized Whirlpool servicing dealer for
an annual checkup.
Electrical Shock and
Fire Hazard
l
Unplug power cord from receptacle before
cleaning unit Failure to do so could resuit
in electrical shock or personal injury.
l
Do not use flammable fluids, solvents,
abrasive cleaners or strong detergents.
Fire or product damage could resutt.
4