Filter
Top Products
Operating Your Air Conditioner
Starting your air conditioner
.
Electrlcal Shock Hazard
l Plug unlt only Into grounded electrkal
outlet.
l Do not use an extenslon cord.
l Do not operate unlt wlth front removed.
Failure to follow the above precautions
could resuft In efectrkal shock or personal
Injury.
1. Set Exhaust Control
to CLOSED for maxi-
mum cooling.
2. Set Fan
Speed
Control
to the desired setting.
QUIET COOL
.................. for sleeping comfort
REGULAR COOL
............. for normal cooling
MAX COOL
....................
for maximum cooling
FAN ONLY
..................
for circulating room air
when no cooling is desired
3. Turn the Thermostat Control
to number 6
(mid-setting). You can adjust the air
conditioner’s cooling performance by resetting
the Thermostat Control to
a
higher number for
more cooling. Lower the number setting for
less cooling. You will need to experiment to
find the setting which suits you best.
NOTE: If you turn your air conditioner off or if the
compressor turns off when lowering the Thermo-
stat Control, wait at least 3 minutes before turning
ii back on or you may blow a fuse or trip a circuit
breaker.