Operating Your Air
Conditioner
In order to obtain the best possible results from your air conditioner, it is important that you operate it
properly. This section will tell you how to do justthat.
Starting your air conditioner
Electrical Shock Hazard
l
Plug unit only into grounded electrical outlet.
l
Do not use an extension cord.
l
Do not operate unit with front panel removed.
Failure to follow the above precautions could
result in electrical shock or personal injury.
1. Set Fan Control to the desired setting.
QUIET
COOL . . . . . . . . . . . . . . . . . . . . .
for sleeping comfort
REGULAR COOL . . . . . . . . . . . . . . . . . for normal cooling
MAX COOL . . . . . . . . . . . . . . . . . . . . . . for maximum cooling
FAN ONLY . . . . . . . . . . . . . . . . . . . . for circulating room air
when no cooling is desired
2. Turn the Thermostat Control to the desired
setting. You can adjust the air conditioner’s
cooling performance by turning the Thermo-
stat Control clockwise for more cooling or
counterclockwise for less cooling. You will
need to experiment to find the setting which
suits you best.
NOTE: If you turn your air conditioner off or if the
compressor turns off when lowering the Thermo-
stat Control, wait at least 3 minutes before
turning it back on. Doing this keeps the air
conditioner from blowing a fuse or tripping a
circuit breaker.
mm 01
H
THERMOSTAT
Changing air direction
The louvers, in the top grille area of the air
conditioner, control the direction of the cooled air.
---
Move the tab, at the top left of the louvered area,
in the direction you want the air to go (right, left or
straight ahead).
ii?=---
