Whirlpool ACH082 Air Conditioner User Manual


 
Cleaning the front panel
1. Unplug power cord.
2. Remove the front panel from unit when
cleaning. Remove two screws from bottom
edge of front panel.
3. Lii the front panel up and toward you.
4. Remove slideout filter and clean separately.
(See “Cleaning the filter” below.)
NOTE: Front does not have to be removed to
clean fifter.
5. Clean front panel with warm water and mild
soap or detergent. Use a soft cloth. Rinse and
dry. Replace front panel.
6. wipe control panel clean with a soft, dry cloth.
Cleaning the filter
The filter is cleanable. A clean filter helps remove
dust, lint and other particles from the air. Check
every two weeks to see if fitter needs cleaning.
1. Remove fitter by sliding the filter up and out
the top of front panel.
2. Clean filter, using a vacuum cleaner.
OR
If very dirty, wash filter with warm water and
mild detergent. Air dry thoroughly before
replacing.
3. Replace filter by sliding it back down into
opening at the top of front panel.
Screw
Caring For Your Air Conditioner
Annual maintenance
Your air conditioner needs annual maintenance
to help ensure steady, top performance through-
out the year.
Call the service company recommended by
your dealer to:
l
Inspect and clean the coils and condensate
water passages.
l
Check fan and fan motor.
The compressor and fan motor are sealed and
need no oiling. Expense of annual inspection is
customer’s responsibility.
OR
If you are familiar with electrical appliances, you
can do the cleaning and maintenance yourself. If
you choose to do so, follow the steps on page 6.
5