Filter
Top Products
Operating dehumidifier
6
TO TURN DEHUMIDIFIER ON:
Press the ON/OFF button. All lights will
flash once.If the Empty/Adjust Bucket
light comes on, the dehumidifier will not
operate.Empty or adjust bucket.
Each time you unplug the dehumidifier
or power is interrupted,the control will
return to your previous settings.
MODE SELECTION
Press MODE button to select fan speed.
Choose LOW, HIGH, CONTINUOUS or
AUTO DRY.
If you have selected LOW or HIGH:
Pressorto set the amount of
moisture you want removed. Pressing
increases the amount of moisture
removed; pressingdecreases the
amount of moisture removed.The
indicator light will change according to
the number of times you pressor.
If you have selected CONTINUOUS:
You cannot change the amount of
moisture you want removed.
Pressing
orwill not increase or
decrease the amount of moisture
removed.
If you have selected AUTO DRY:
Pressorto set the amount of
moisture you want removed. The
dehumidifier will automatically adjust
fan speed and/or turn on and off to
maintain your setting.
TO TURN DEHUMIDIFIER OFF:
Press the ON/OFF button.The
dehumidifier will retain your last
settings.
EMPTY/ADJUST BUCKET light:
If this light is on, the dehumidifier is not
running. This light indicates that you
need to check:
• If the bucket is full, empty bucket and
replace.
• If the bucket is not in position,
remove bucket and replace.Make
sure the bucket fits all the way into the
dehumidifier and the light is off,
or dehumidifier will not run.
If your control looks like C:
MODE
ON / OFF
CONTINUOUS
HIGH
LOW
EMPTY /ADJUST
BUCKET
AUTO DRY
MOIST
DRY
selects mode
Control C
adjusts humidity removal set point
(amount of moisture removed from room)
indicates the bucket is full
OR
the bucket is not in position