Westinghouse WST6003 Fan User Manual


 
11. To prevent a possible fire, do not block air intakes or exhaust in any
manner. Do not use on soft surfaces, like a bed, where openings may
become blocked. Use the Heater on flat, dry surfaces only.
12. A Heater has hot and arcing or sparking parts inside. Do not use it in
areas where gasoline, paint, or flammable liquids are used or stored.
13. Use this Heater only as directed in this manual, Any other use not
recommended by the manufacturer may cause fire, electric shock, or
injury to persons.
14. Avoid the use of an extension cord because the extension cord may
overheat and cause risk of fire. However, if you must use an extension
cord, the cord shall be #14 AWG minimum size and rated not less than
1875 watts.
15. If the Heater will not operate: See specific instructions on Auto Safety
Shut Off.
16. Do not place the Heater on an uneven or small surface which might
allow it to tip or fall.
17. Do not operate the Heater with Heater Guards removed.
18. The Heater must be 12 inches (300mm) distance away from the wall or
other objects.
19. This Heater includes a visual alarm to warn that parts of the Heater are
getting excessively hot. If the alarm flashes, immediately turn the Heater
OFF and inspect for any objects on or adjacent to the Heater that may
cause high temperatures.
DO NOT OPERATE THE HEATER WITH THE RED
SAFETY LIGHT FLASHING .
SAVE THESE INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
2