Wayne-Dalton C24 Door User Manual


  Open as PDF
of 2
 
1/8" or 1/4" glazing in a choice of materials set in automotive rubber beading, 20 ½" x 4 ½").
Prepainted aluminum full view sections also available with various choices of glazing materials.
2.07 W
eatherstripping
A) Optional factory-installed foam joint seal is available. Optional field-installed exterior
jamb/perimeter seal is available.
2.08 Insulation
A) As specified will be 1-5/8" polystyrene secured in sections and muntins without the use of muntin
clips and pop rivets. Inside backup sheets will be white prepainted (embossed steel), (vinyl).
2.09 W
indload
A) Per DASMA 102-2003 and as required by local codes.
2.10 Options
A) Chain hoist or motor operator.
3.01 Inst
all
A) Install the doors in accordance with Wayne-Dalton Corp. instructions and standards. Installation will
be by authorized Wayne-Dalton representative.
©2004 Wayne-Dalton Corp. 8/2003
Models C24 & C20 Specifications pg.2
PART III- EXECUTION
 previous