Filter
Top Products
23
Please Do Not Return This Product To The Store. Contact your local Wayne-Dalton dealer. To find your local Wayne-Dalton dealer, refer to your
local yellow pages/business listings or go to the Find a Dealer section online at www.wayne-dalton.com
Tools Needed:
INSTALLATION
Slide the nylon center bushing into the
stationary spring cone at the end of the
spring and align the stationary spring
cone(s) with the holes in the center
bearing bracket. Secure the spring(s) to
the center bearing bracket with
(2) 3/8”- 16 x 1-1/2” hex head bolts
and (2) 3/8”- 16 nuts.
IMPORTANT: SPRINGS UNDER TENSION
CAN BE DANGEROUS.
IMPORTANT: THE SPRING WARNING
TAG(S) SUPPLIED MUST BE SECURELY
ATTACHED TO THE STATIONARY SPRING
CONE IN PLAIN VIEW. SHOULD A
REPLACEMENT SPRING WARNING TAG
BE REQUIRED, CONTACT WAYNE-
DALTON CORP. FOR FREE
REPLACEMENTS.
17
Nylon Center Bushing
TORSION
SPRING
(2) 3/8”- 16 NUT
(2) 3/8”- 16 X 1-1/2”
HEX HEAD BOLT
CENTER BEARING
BRACKET
TORSION
SPRING
TORSION
SPRING
NYLON CENTER
BUSHING
CENTER BEARING
BRACKET
STATIONARY
SPRING CONE
STATIONARY
SPRING CONE
9/16” Socket
Ratchet Wrench
9/16” Wrench