Filter
Top Products
FAX-1844-1100
QUICK CLAMP
THINBAND
®
Heater with
Watlow set new standards in band heaters with THINBAND
®
.
Now Watlow makes it even easier to install THINBAND heaters
with the Quick Clamp option. The flexible one-piece design
makes installation on plastics molding equipment faster and
easier. Because it can be opened to the full diameter of the
barrel without causing internal damage to the heater, the
THINBAND heater can be installed on a barrel without removing
other band heaters already in place or requiring a more
expensive two-piece design.
And now with Quick Clamp, the THINBAND can be secured
tightly in place in a matter of seconds. The spring-loaded clamp
secures the heater tightly around the barrel with an easy flip of
the lever.
THINBAND opens up to fit
over barrel. No need to
remove other heaters.
Now ...Install THINBAND
Barrel Heaters In Seconds
• THINBAND with Quick Clamp fits over barrels and snaps in
place with easy flip of its latching lever.
• Hot change-outs are completed in seconds.
• No tools needed.
• Spring-tensioned clamp keeps THINBAND heater tight
against barrel—won't loosen over time.
• Ideal for vertical applications.
• Available on selected stock and made-to-order THINBAND
barrel heaters—minimum four inch (100 mm) diameter,
1
1
⁄2 inch (38 mm) width.
1
1
⁄2 (38.1) to 2
11
⁄16 (69.3) 1 NA
2
3
⁄4 (69.9) to 3
11
⁄16 (94.8) 2
1
⁄2" (12.7)
3
3
⁄4 (95.3) to 4
11
⁄16 (120.1) 2 1" (25.4)
4
3
⁄4 (120.6) to 5
11
⁄16 (145.5) 3
1
⁄2" (12.7)
5
3
⁄4 (146.1) to 7 (145.5) 3 1" (25.4)
Contact your Authorized Watlow
distributor for more details and
ordering information.
On selected stock
Clearance Dimensions
Makes Changing Heaters
A Snap!
Quick Clamp
Width Range # Quick Distance
in (mm) Clamps Between Clamps
in (mm)
• Standard gap is
1
⁄2 inch.
• If space for thermocouple is necessary, a maximum of 1
1
⁄4 inch
gap can be allowed between heater ends. Specify when
ordering.
1
Quick Clamp continuously tensions heater against barrel
for improved heat transfer.
3
One easy flip of the latching
lever and Quick Clamp shuts,
completing installation.
2
D
2-1/8"
2
1
⁄8"
12001 Lackland Road
St. Louis, Missouri 63146 USA
Phone: 314-878-4600
Fax: 314-878-2151
Internet: www.watlow.com
e-mail: info@watlow.com
© 2001 Watlow Electric Manufacturing Company