Filter
Top Products
RAYMAX 1120
How to Order
To order your stock RAYMAX heater, specify:
• RAYMAX 1120
• Quantity
• Watlow code number (from Watlow Heater's Catalog)
If our stock units do not meet your application needs,
Watlow can manufacture RAYMAX heaters to your special
requirements. For made-to-order heaters, specify the
following:
• Heated width and length. Three-phase panels must have
width divisible by three.
• Total wattage of each panel.
• Exact voltage and phase. A five percent variation in
voltage at the oven will cause a 10 percent variation
in power.
• Zoning. Indicate dimensions and wattage of each zone.
• Mounting legs or mounting studs, if desired. For studs,
give number and location, or indicate standard location.
• Terminal location if non-standard.
• Terminal box or wire raceway, if required.
Supplying a drawing with an order or request for quotation
can be very helpful in clarifying design information.
Availability
Stock: Next day shipment.
Made-to-Order: Consult Watlow.
Applications and Technical Data
Face Temperature: 1100°F maximum (595°C)
Wattage: Watt densities up to 20 W/in
2
(3 W/cm
2
)
Standard Voltage: 120, 240, 480VÅ(ac), 1-phase. Balanced
3-phase available on unit widths divisible by three. Other
voltages are available.
Terminals: Non-standard locations are also available.
Please specify.
Standard Dimensions:±
1
⁄16 inch (0.0625 mm)
Typical Peak Energy Wavelength: 3-3.5 microns
Specifications
1
9
/16
"
(39 mm)
Overall Width =
Heated Width
+
3
/8
"
(9.5 mm)
Overall Length =
Heated Length
+ 1
1
/4
"
(31.75 mm)
A B
3
/8
"
(9 mm)
3
/8
"
(9 mm)
7
/8
"
(22 mm)
1
1
/2
"
(38 mm)
1
3
/16
"
(30 mm)
1
1
/2
"
(38 mm)
Width: inches (mm) 1 (25.4) 36 (914.4) 1 (25.4)
Length: inches (mm) 6 (152.4) 70 (1778) any
Area: in
2
(cm
2
) 6 (38.7) 864 (5574.2) any
Note: Less than maximum length X width may exceed
maximum area.
Heater Dimensions Min. Max. Increments