Filter
Top Products
4
23
Attach side panel (2) to the assembly from the previous step using cam bolts and dowels as guides. Insert cam
locks (E) into panel (4) and slats (3,6,23) and tighten with a screwdriver. Attach bottom shelf (5) to side panel (2)
using bolts (T), spring washers (U) and washers (V) where indicated above. Tighten bolts (T) with wrench (W).
Attach bottom shelf (5) to side panel (1) using bolts (T), spring washers (U) and washers (V) where indicated
above. Tighten bolts (T) with wrench (W).