Wagner SprayTech 9155 Water Pump User Manual


 
13
English
Cleanup
Important Cleaning Notes - Read before cleaning
When using latex materials, clean your sprayer and
components with water. When using oil-based materials, use
mineral spirits. DO NOT use gasoline to clean your sprayer.
Do not use mineral spirits on latex materials, or the mixture
will turn into a jelly-like substance which is difcult to remove.
No matter which cleaning solution you use, make sure to
dispose of it properly when nished cleaning your sprayer.
Thorough cleaning and lubrication of the sprayer is the most
important step you can take to ensure proper operation after
storage.
Follow these steps whenever cleaning with
mineral spirits:
Always ush spray gun at least one hose
length away from spray pump.
If collecting ushed solvents in one gallon
metal container, place it into an empty ve
gallon container, then ush.
Area must be free from vapors.
Follow all cleanup instructions.
DO NOT use gasoline to clean your sprayer.
1. Lock the gun and remove the spray tip assembly. Place
the suction tube and return tube into an empty waste
container.
3. Remove the inlet lter from the suction tube and place
into the waste container.
2. Using a garden hose, rinse off the suction tube, return
tube and inlet lter. Empty the waste container.
4. Verify that the seals
are present inside the
adapter and suction
tube (a). Thread the
pump cleaning adapter
(b) onto a garden hose
(c). Connect hose and
adapter to the tting on
the end of the suction
tube (d).
(b)
(c)
(d)
(a)
Empty waste
container
Call 1-800-880-0993 if you have any problems or questions regarding the cleaning of your sprayer.
Follow these steps if you used latex materials and if you have a garden hose available. If you do not have a garden hose
available, follow the Cleanup - Oil-Based Materials instructions.
Continued on next page.