Filter
Top Products
– 14 –
HEAT SHIELD (GHIR44)
WARNING: SHUT OFF THE GAS BEFORE
SERVICING.
1. Remove burner assemblies as outlined in
Burner Assembly.
2. Remove the cotter pin from the shaft of the
heat shield.
3. Remove the heat shield from the broiler.
4. Reverse the procedure to install.
PILOT ELBOW NOZZLE
WARNING: SHUT OFF THE GAS BEFORE
SERVICING.
WARNING: ALL GAS JOINTS DISTURBED
DURING SERVICING MUST BE CHECKED FOR
LEAKS. CHECK WITH SOAP AND WATER
SOLUTION (BUBBLES). DO NOT USE AN OPEN
FLAME.
1. Remove the burner box cover as outlined in
Covers, Panels and Handles.
2. Remove the burner assemblies as outlined in
Burner Assemblies.
3. Allow the pilot elbow nozzles to cool.
4. Remove the pilot elbow nozzle from sub-
manifold assembly.
5. Reverse the procedure to install.
SUB-MANIFOLD ASSEMBLY
GHCB40
WARNING: SHUT OFF THE GAS BEFORE
SERVICING.
WARNING: ALL GAS JOINTS DISTURBED
DURING SERVICING MUST BE CHECKED FOR
LEAKS. CHECK WITH SOAP AND WATER
SOLUTION (BUBBLES). DO NOT USE AN OPEN
FLAME.
1. Remove the burner box cover as outlined in
Covers, Panels and Handles.
2. Remove the burner assemblies as outlined in
Burner Assemblies.
3. Remove the pilot elbow nozzles as outlined in
Pilot Elbow Nozzle.