Filter
Top Products
– 6 –
REMOVAL AND REPLACEMENT OF PARTS
COVERS, PANELS AND HANDLES
Burner Box Cover (GHCB40, GHCB44,
GHIR44)
WARNING: SHUT OFF THE GAS BEFORE
SERVICING.
1. Open the augratin oven door.
2. Remove the oven rack.
3. Remove the four screws and bushings from
the oven.
4. Remove the augratin oven bottom assembly
as outlined in Augratin Oven Bottom Assembly.
5. Lift and remove the burner box cover from the
broiler.
6. Reverse the procedure to install.
Burner Shield Cover [HCB2(B), IR1,
IR2(B)]
WARNING: SHUT OFF THE GAS BEFORE
SERVICING.
NOTE: The models HCB2(B) and IR2(B) have two
burner shield covers.
1. Remove the two screws from the burner shield
cover and the broiler.
2. Lift and remove the burner shield cover from
the broiler.
3. Reverse the procedure to install.