Filter
Top Products
– 5 –
IMPORTANT
STOP BOLTS MUST BE IN POSITION FOR SAFE OPERATION OF GRID. IF DAMAGED OR MISSING,
REPLACE AT ONCE. DO NOT OPERATE GRID WITHOUT BOLTS.
Two (2) broiler grid 1/4-20 stop bolts and nuts are supplied with each broiler grid to ensure that the grid is not
accidentally pulled completely from the broil section while hot. One (1) stop bolt and nut are mounted to the grid
carriage RT. and LT. HD. side member through a 0.281 diameter hole directly in front of the grid stop tab. The
stop nuts and bolts are screwed tightly against the side members and are properly adjusted extending
approximately 1/2” below the stop tab as shown in the above photo.